Visit www.acad.jobs with all Jobs for Academics!
                
Position: 1 Marie Curie PhD position in physics/electronics engineering - EU project RADSAGA
Institution: European Organization for Nuclear Research
Location: Genève, Switzerland
Duties: The objective of the PhD will be to advance related to the knowledge of radiation qualification of state-of-the-art commercial electronic components and modules. Emerging radiation hardness assurance needs for space, ground level and accelerator applications demand performing radiation qualification following approaches that are not directly covered by the existing radiation test standards. Therefore, the role of the PhD student will be to support the RADSAGA Work Packages 3 and 4 related to the development, validation and documentation of alternative test methodologies
Requirements: Master degree in electronics engineering, physics, engineering physics or nuclear engineering; Experience in digital system electronics design, including VHDL or Verilog knowledge; Basic knowledge of radiation effects in electronics; Experience with programming, preferably in C++ and Python, and the use of data analysis codes such as MatLab is an important asset
   
Text: 1 Marie Curie PhD position in physics/electronics engineering - EU project RADSAGA (RADiation and reliability challenges for electronics used in Space, Avionics, on the Ground and at Accelerators) Geneva, Switzerland Full-time Company Description The EU-funded Horizon 2020 programme has two main strategic objectives: to strengthen the scientific and technological base of European industry and to encourage its international competitiveness, while promoting research that supports EU policies. Marie Skłodowska-Curie Actions ITN: RADSAGA The RADSAGA training network is a collaboration of leading laboratories, companies and universities working in the field of electronics exposed to radiation. Within the network, young scientists are trained in a variety of aspects related to interactions of particles with electronic components. Contact email: Ruben.Garcia.Alia@cern.ch, Sonia.Allegretti@cern.ch RADSAGA Website: https://radsaga.web.cern.ch/ Diversity has been an integral part of CERN's and the EU's mission. Job Description Welcome to the Marie Sklodowska-Curie Actions As a recent graduate from university or advanced technical institute, you’re no doubt looking for the chance to make your mark. Here it is: we seek lively and inquiring minds with a heightened sense of curiosity to take part in projects of advanced development work, in a broad range of applied sciences and engineering fields. Marie Sklodowska-Curie Actions train young researchers, building the careers of tomorrow’s leaders in research and industry. What could be a better boost for your career than becoming an Early Career Stage Researcher in an Innovative Training Networks project within the framework of the prestigious Marie Sklodowska-Curie programmes? The objective of the PhD will be to advance related to the knowledge of radiation qualification of state-of-the-art commercial electronic components and modules. Emerging radiation hardness assurance needs for space, ground level and accelerator applications demand performing radiation qualification following approaches that are not directly covered by the existing radiation test standards. Therefore, the role of the PhD student will be to support the RADSAGA Work Packages 3 and 4 related to the development, validation and documentation of alternative test methodologies. More specifically, the position will focus on the development of digital electronic systems (based on e.g. FPGAs, microprocessors…) both as test beds for other components and systems, as well as related to actual radiation tolerant systems to be evaluated under accelerated irradiation conditions. The experimental work will focus on available irradiation facilities allowing for testing of large equipment, such as CHARM at CERN, or ChipIr at ISIS-STFC. The investigation of possible additional facilities for board/system level testing will also be part of the PhD research goals. During the thesis, the student will make use of the RADSAGA system level guidelines in order to qualify ongoing radiation tolerant developments in the scope of the various RADSAGA partners. The results produced will help consolidating and where applicable updating/completing the guidelines, with the purpose of further standardizing the approach for the more global radiation effects community. In addition to the digital electronics design aspects, progress related to the implications of radiation-matter interaction for system level testing will be part of the PhD topic, both experimentally and potentially via Monte Carlo simulations. The successful applicant will in first instance be employed at CERN as an Early Stage Researcher in the framework of the Innovative Training Network RADSAGA ( https://radsaga.web.cern.ch/ ) until 30 September 2021. Thereafter the applicant will continue with another two years contract paid by CERN. Qualifications In order to qualify for a place in the project you will need to meet the following requirements: At the time of recruitment: be in possession of a university degree (MSc) allowing you to embark on a doctorate (candidates who are currently studying for their MSc may apply if they will finish before October 2020, however, the RADSAGA contract cannot begin until the MSc is completed) be in your first 4 years of your full-time research career ( after obtaining your degree (MSc)) must NOT hold a PhD yet must apply for a position in a European Country where you did not live or work for more than 12 months in the last three years (counted from the hypothetical day of recruitment). Please make sure that you satisfy the mobility requirements for the position. Candidates of any nationality can apply. Proficiency in English is required. Technical qualifications: · Master degree in electronics engineering, physics, engineering physics or nuclear engineering · Experience in digital system electronics design, including VHDL or Verilog knowledge · Basic knowledge of radiation effects in electronics · Experience with programming, preferably in C++ and Python, and the use of data analysis codes such as MatLab is an important asset. Additional Information All ESR positions offer: An employment contract for durations from 6 to max. 36 months. The stipend granted by the EU is EUR 3270 brut EUR 600 mobility country coefficient factor if applicable. The allowance which may be increased depending on the hosting organization. In accordance with the European Commission’s allowances for ITNs, a training allowance covers training activities, conference attendance, etc. This is how you can apply: You will need the following documents to complete your application: A CV A copy of the last (highest) qualification One letter of recommendation to give as broad as possible overview of your academic and/or professional achievements In addition, contact details of 2 academic or professional references (name, position, e-mail, telephone and indicating the relationship with the applicant) Interviews will be held as soon as possible after the closing date and will include a video interview Employment contracts will start as of September 2020 Please make sure you have all the documents requested to hand as you start your application. Once submitted you will not be able to upload any documents or edit your application Closing date: 25 July 2020 I'm interested Privacy Policy I'm interested Refer a friend share this job Powered by (Data Processor) Privacy Policy and Terms of Use Share to WeChat × Copy the link and open WeChat to share. Copy to clipboard Open WeChat Share to WeChat × Use Scan QR Code in WeChat and click ··· to share.
Please click here, if the Job didn't load correctly.







Please wait. You are being redirected to the Job in 3 seconds.